Forum home The potting shed

Buy or make a raised pond

Bit of a dilema here. Was hoping to order a rasied pond from Woodblocx but they dont do a 3ft width (want a 6 x 3 x 2) so I'm unfortunatly back to square one. I've looked at some pre built sites but the finished product looks cheap and not something I want to look at.

I'm a bit cautious of making one from scratch. You see I quite like the look of stone ones but they look an awful lot of work. I also don't like the idea of making one with no experience.

Advice, and links to sites that sell the size I require would be much apprechiated image


  • auntie bettyauntie betty Posts: 208

    I'd make a stone one - its really easy. I've just built myself 2.5m x 4m one and I'M A GIRL!! Mine was complicated because a) I wanted an irregular shape, b) its big, so needed an interior breezeblock retaining wall first, c) I wanted dry stone walling around it with stone capping and d) I had loads of old rough limestone I wanted to use, but this did not come in anywhere near uniform shapes and sizes. If you're after a rectangle and don't need double thickness walls, I'd get some stone and go at it. I dug a trench of about 5 inches deep and 4 inches wider than my total wall thickness, then filled with readymix concrete. Gave it a few days to go off. Then squished some mortar on top and started building. The breezeblocks were a doddle, being uniform, and the whole lot took me about half a day. Btw, I used readymix mortar from B&Q, but subsituted some of the water for liquid latex (from builder's merchant) just to give it a bit of extra frost/water-proofing. Its the stuff they add to render for the same reason. Makes the mortar stickier, so easier for a novice to use as well. Easy peasy. Putting a wider stone slab (eg. the foot square ones) on top as a coping works well, and it hides the edge of your liner if you overhang in by an inch or so.. Honestly, my boys' lego is more complicated. I honestly think anyone can be a brickie if they're only doing low walls - its staying true going upwards thats the tricky bit!

  • marshmellomarshmello Posts: 683

    HOW MUCH !!!! image

  • RubyLeafRubyLeaf Posts: 260

    Thats given me some faith. Thanks betty! I'll definatly look into that. I'm after a simple rectangle shape.

    Is this what you ment by drystone walling?

    Hmm, I wonder if its possible to add succulents in the holes? Likely not haha image

  • auntie bettyauntie betty Posts: 208

    Yeah, although my blocks aren't nearly so regular! You can put all sorts of plants into the holes, especially if you've deliberately left little soil-filled 'pockets' as u've gone. Many sedums like it, as do some houseleeks, assuming its sunny. If not, then harts-tongue ferns, mini ivies, trailing perennial campanulas and alchemilla all thrive in my walls. Various alpines like it too, tho not generally in shade. Honest, its a doddle. Get ur finger out and BE BRAVE! Use a rigid liner and its even easier..

  • Hi i can understand your situation, over this year i have been terracing my garden and wanted a pond so last month i incorporated a block pond (2 blocks high 2ft X 4 blocks about 5-6ft long and 2.5 block wide.

    It was very easy to do and then lined with pond liner, and topped with decking board, last weekend i decided to add a water fall and over the long weekend and with a few tweeks managed to get all working.

    The wildlife love it and with the use of freecycle i even managed to get a load of free plants and lillies for instant impact.


Sign In or Register to comment.