Ryobi RBV26B 26cc POWR LT2 wont start need some advise
borderman239
Posts: 1
I bought this item second hand and its still like new ,
but i have an issue the switch by the plastic blower was missing and by passed to the main kill switch on the handle
I cleaned the carb and the blower is not getting fuel to the engine even after priming ,there plenty of spark on the plug i have followed videos on you tube on how to start this blower but even doing the correct way its still won't fire up what does this switch do by the plastic tube as its also one on the kill switch handle on which the 2 wires on this was connected to the main kill switch on the handle ,it as plenty of compression the fuel is ok plenty of spark but will not even fire up or turn over ,the plug looks dry after tuning over so is something in the carb not working how can i test the carb
Last edited: 01 November 2017 20:58:11
Posts
you could try asking here
https://uk.ryobitools.eu/outdoor/blowers/vacuums/rbv26/rbv26b/